How to identify good fittings, especially flanges, in high-quality autoclave flanges is very important in the operation of the equipment. All we have to carefully select, how to choose a good flange, then we will give you a brief introduction. a bit!
The reactor body material is mainly made of 1cr18Ni10Ti stainless steel, and titanium (TA2), nickel (Ni6) and composite steel plates can be made according to different media requirements. The structure of the kettle body has a flat cover, a convex cover and a closed kettle with a manhole. Body, the opening on the lid of the kettle can be designed according to the user's requirements; the heating method includes jacket steam, jacket hot oil electric heating, etc., which can be arbitrarily selected when the user orders. For the inner surface of the kettle with polishing requirements, the above mirror polishing level can be achieved, and the high-viscosity material is processed into a conical bottom for easy discharging and cleaning.
The high-pressure reaction kettle is a typical innovation of the magnetic transmission device applied to large-scale reaction equipment. It fundamentally solves the problem of shaft seal leakage that cannot be overcome by the previous packing seal and mechanical seal, without any leakage and pollution. It is the current high temperature and high pressure reaction in China. The chemical reaction zui under the autoclave pressure is an ideal device, especially for the chemical reaction of flammable, explosive and toxic medium, which shows its superiority. The material of the autoclave is mainly made of 1cr18Ni10Ti stainless steel, and can be made of titanium (TA2), nickel (Ni6) and composite steel according to different media requirements. The structure of the kettle body has a flat cover, a convex cover and a closed type with manhole. The reaction kettle body and the opening on the kettle lid can be designed according to the user's requirements; the heating method includes jacket steam, jacket hot oil electric heating and the like for the user to order when arbitrarily selected. For the inner surface of the kettle with polishing requirements, the above mirror polishing level can be achieved, and the high-viscosity material is processed into a conical bottom for easy discharging and cleaning.
